EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0805 Package Chip LED (1.0m Height)
17-21SURC/S530-XX/TR8 Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow
solder process. ․Mono-color type. ․Pb-free.
․The product itself will remain with in RoHS complaint version
Descriptions
․The 17-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol. ․General use.
Device Selection Guide
Part No.
Chip Material AlGaInP
Emitted Color Brilliant Red
Resin Color Water Clear
17-21SURC/S530-XX/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SURC/S530-XX/TR8 Package Outline Dimensions
-+1.05
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SURC/S530-XX/TR8 Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature
VR 5 IF 25 IFP 60 Pd 60 ESD Topr Tstg Tsol
2000 -40 ~ +85 -40 ~ +90
V mA mA mW V ℃ ℃
Reflow Soldering:260 ℃ for 10 sec Hand Soldering:350℃ for 3 sec
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
*Chip Rank
Min. Typ. Max. Unit
Condition
Luminous Intensity Iv
A2 15 38 ----- A3 40 60 ----- mcd A4 50 75 ----- A5 60 90 ----- A6 85 123 ----- Viewing Angle Peak Wavelength
Dominant Wavelength 2θ1/2 ----- ----- 140 ----- deg λp ----- ----- 632 ----- nm λd ----- ----- 624 ----- nm △λ ----- ----- 20 ----- nm VF
IF=20 mA
Spectrum Radiation
Bandwidth Forward Voltage
----- ----- 2.0 2.4 V
μA
VR=5V
Reverse Current
IR ----- ----- ----- 10
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SURC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
元器件交易网www.cecb2b.com EVERLIGHT ELECTRONICS CO.,LTD. 17-21SURC/S530-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank xxxxxxxxxxxxRoHSxxxxxxxxxxxxxxxxxxxxxxxx Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
元器件交易网www.cecb2b.com EVERLIGHT ELECTRONICS CO.,LTD. 17-21SURC/S530-XX/TR8 Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging LabelAluminum moisture-proof bagDesiccantLabel
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SURC/S530-XX/TR8 Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level:90% LTPD:10%
Test Sample
No. Items Test Condition Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
1 Reflow Soldering 22 PCS.0/1 6 Min.
Min. 5sec. H : +100℃ 15min
300 Cycles 2 Temperature Cycle ∫ 5 min
L : -40℃ 15min H : +100℃ 5min
3 Thermal Shock ∫ 10 sec
L : -10℃ 5min
High Temperature
Temp. : 100℃ 4
Storage
Low Temperature
Temp. : -40℃ 5
Storage 6 7
22 PCS.0/1
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.22 PCS.22 PCS.22 PCS.22 PCS.
0/1 0/1 0/1 0/1 0/1
DC Operating Life High Temperature / High Humidity
IF = 20 mA 85℃/ 85%RH
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SURC/S530-XX/TR8 Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃or less and 60% RH orless. If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SURC/S530-XX/TR8 4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-61, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 9 Device No:SZDSE-171-019 Prepared date: 27-Oct-2007 Prepared by: Zhouhua
因篇幅问题不能全部显示,请点此查看更多更全内容
Copyright © 2019- efsc.cn 版权所有 赣ICP备2024042792号-1
违法及侵权请联系:TEL:199 1889 7713 E-MAIL:2724546146@qq.com
本站由北京市万商天勤律师事务所王兴未律师提供法律服务